Ningbo Haijiang Machinery Co.,Ltd.
Haijiang injection molding machine-Energy saving More
Add to Cart
300*500*12mm size crate machine , Horizontal Injection Molding Machine For fruit Crate Making
Characteristics
1. Adopts the imported control components, durable, safe, and low failure rate.
2. Use human-computer interface, simple and more visually oriented.
3. The machine uses machine electrical and air linkage, excellent effect of bottom sealing.
4. East to adjust different sizes of cartons, adjust quickly and easily, available for a wide range of cartons.
5. Low power consumption, simple and convenient operation, low noise.
6. Use tap to seal the cartoon bottom, protected from weather, sealing reliable.
Specification
| Injection Unit | UNIT | A | B | C | D |
| Screw diameter | mm | 90 | 95 | 105 | 110 |
| Screw L/D ratio | L/D | 23.2 | 22 | 19.9 | 19 |
| Shot size(theoretical) | CM³ | 2924 | 3258 | 3981 | 4369 |
| Injection weight(ps) | g | 2632 | 2933 | 3583 | 3932 |
| Injection rate | g/s | 574 | 640 | 781 | 858 |
| Injection pressure | Mpa | 195 | 175 | 143 | 130 |
| Screw speed | rpm | 115 | |||
| Clamping Unit | |||||
| Clamp tonnage | KN | 7800 | |||
| toggle Stroke | Mm | 950 | |||
| Space Between tie Bars | mm | 980*950 | |||
| Max.mold height | mm | 960 | |||
| Min.mold height | mm | 400 | |||
| Ejector Stroke | Mm | 280 | |||
| Ejector tonnage | KN | 186 | |||
| Others | |||||
| Max.pump pressure | Mpa | 16 | |||
| Pump motor power | KW | 37+30 | |||
| Heater power | kw | 56.7 | |||
| Machine size(L x W x H) | m | 11.43*2.4*3.14 | |||
| Machine weight | Ton | 37 | |||
| Oil tank capacity | L | 1500 | |||
1.How to choose injection molding machine?
The injection weight should be about 1.2× product's weight; The tie bar space should be bigger than the mold dimension; Contact with us for more information.
2.How to pay?
30% deposit T/T in advance, the balance 70% payment by T/T before delivery (we accept payment by T/T, L/C etc.)
3.Is that possible for your company to send engineer to install machine for commissioning, even train our workers?
Yes, we can send our engineer to your factory for installing, commissioning, training. We have some engineers flying among different countries for after sale service and technical support. As per experience, if everything OK usually 5-15 days is enough. Therefore, before shipment, we need you to prepare invitation letter for visa. However, please be noted that all cost happened for visa, travel, hotel should be paid in advance by customers. In addition, we cannot guarantee each visa is successful.
4.If we buy your machines, is there any warranty?
Yes, definitely. Totally 24-months warranty after shipment for mechanical parts, hydraulic parts, electric components (The screw just has 6-months). We are responsible for broken parts within 24-months. We will supply those parts in freeway but the possible transportation cost should be paid by clients.
5.What is different with A,B,C screw, What is the price different?
The screw model is designed for different material and requirements, the screw diameter Changes from small, middle and big. There is no price difference in the price for choosing A/B/C screw types.