Ningbo Haijiang Machinery Co.,Ltd.
Haijiang injection molding machine-Energy saving More
Add to Cart
Injection Molding Machine HJF400
FEATURES
- A variety of text can be switched.
- Manual, semi-automatic and fully automatic mode.
- Automatic movement monitoring with alarm and fault diagnosis.
- Function of slope setting can set the start and stop of movements, so as ensure the smooth movement.
CONTROL SYSTEM
All digital control system uses dedicated controller, multiple CPU processing division,
a multi-functional automatic fault detection, alarm system, certificates 99 mold of
processing procedures, with remote control interface. System is of high stability and
responsiveness. System uses color LCD, man made interface for easy operation and
with a number of peripheral interfaces.
HYDRAULIC SYSTEM
Advanced hydraulic system design, through proportional control of pressure, flow achieves rapid multi-level pressure, speed switching, the system configuration is reasonable, stable and reliable. The noise is less than 75 dB. The medium and large machine adopts a two-way cartridge inserted valve system to improve the system of flow and speed of response, and makes the whole machine reach the best performance.
| SPECIFICATION | HJF400 | ||||
| Screw Type | A | B | C |
D |
|
| Screw Diameter | Mm | 70 | 75 | 80 | 85 |
| Screw L/D Ration | L/D | 22 | 20.5 | 19.25 | 17.8 |
| Shot Size(Theoretical) | cm3 | 1384 | 1589 | 1808 | 2098 |
| Injection Weight(PS) | g | 1246 | 1430 | 1627 | 1888 |
| Injection Rate | g/s | 382 | 438 | 499 | 530 |
| Injection Pressure | MPa | 200 | 174 | 155 | 130 |
| Screw Speed | Rpm | 0~160 | |||
| Clamping Force | KN | 4000 | |||
| Opening stroke | Mm | 745 | |||
| Space Between Tie Bars | mm | 725*725 | |||
| Max.Mold Height | mm | 810 | |||
| Min.Mold Height | mm | 280 | |||
| Ejector Stroke | mm | 170 | |||
| Ejector Tonnage | KN | 110 | |||
| Max.Pump Pressure | MPa | 16 | |||
| Pump Motor Power | KW | 37 | |||
| Heater power | KW | 20 | |||
| Machine Dimension(L*W*H) | M | 7*1.9*2.4 | |||
| Machine weight | T | 14.5 | |||
| Oil Tank Capacity | L | 950 | |||
Haijiang Machinery Main configuration
Standard machinery
| PLC | TECHMATION (TAIWAN) |
| Vane Pump | Albert (USA) |
| Directional Valve | Northman(TAIWAN) /Yuken(JAPAN)/Tokimec(JAPAN) |
| Proportional Valve | HNC (TAIWAN) |
| Electric Motor | Qianlima (CHINA ) |
| Contactor | Schneider(France) |
| Plasticizing Oil Motor | STF(CHINA) |
| Air Breaker | LS (KOREA) |
| Thermal Overload Relay | LS (KOREA)/Schneider(France) |
| Limit Switches | Omoron (JAPAN ) |
| Liner Position Sensors (Electric Ruler) | Minor (China) |
| Lubrication Pump | ChaoRun(China) |
Servo machinery
| PLC | PORCHESON (TAIWAN) |
| Directional Valve | Northman(TAIWAN) /Yuken(JAPAN)/Tokimec(JAPAN) |
| Air Breaker | LS (KOREA) |
| SSR(solid state relay) | Fotek(TAIWAN) |
| Plasticizing Oil Motor | STF(China) |
| Limit Switches | Omoron (JAPAN ) |
| Gear Pump | SUMITOMO (JAPAN) |
| Servo Driver | DELTA (TAIWAN) |
| Servo Sensor | ASHCROFT(GERMAN) |
| Servo Motor | Albert(USA)/Phase(ITALY) |